Connecting To An External Speaker Or Pa System - Epson ELP-3000 Owner's Manual

Connecting to an External Speaker or PA System

1
14
l
For most small-or medium-sized rooms, the projector's internal speakers are
sufficient. If you need extra amplification for a large room, you can connect the
projector to an external amplified speaker or PA system.
To connect the projector to an external sound system, you need to obtain an RCA-
to-3.5mm Stereo audio cable. You can get one from your computer dealer.
Before beginning, turn off the projector and the speaker or PA system,
3.5mm
1. Connect the cable's
jack.
2. Connect the RCA plug to the external amplified speaker or PA system. Insert
the cable's red plug into the R side, and the white plug into the L side.
You should now adjust the Fade menu setting. See page
Installation
stereo miniplug into the projector's Audio Out
39.