Epson ELP-3000 Owner's Manual page 22

Epson owner's manual projector elp-3000

Hide thumbs Also See for ELP-3000:

Table of Contents

4. Connect one end of the power cord to the projector's power connector.

Connect the other end to a grounded electrical outlet.

If the projector comes on, turn it off using the power switch at the back of

the projector.

5. To insert the batteries in the remote control, slide off the battery compart-

ment cover as shown here.

6. Insert the two AA batteries included with the projector. Make sure the

polarity of the batteries is correct.

7. Replace the battery compartment cover.

Setting Up the Projector

Table of Contents

P3000 - digital av player