Installation - Epson ELP-3000 Owner's Manual

Installation

T
his chapter describes how to unpack, set up, and connect your projector to
other equipment. You must connect the projector to your computer or to a video
source such as a VCR, camcorder, digital camera, or laser disk player. Connecting
to other equipment is optional. For example, you may want to connect the projec-
tor to both your computer and video source, or set up the projector for one or
more of the following:
Provide audio for one or both image sources. The audio source can be the
l
computer, video source, or another device such as a stereo.
Connect to an external speaker or PA system to amplify the audio.
l
Install the RS-232C Serial Communication Kit. This kit enables communication
l
between your computer and the projector so you can use the remote control to
control your computer and use your computer to control the projector settings.
Directly connect the remote control and the projector using the optional lead
l
wire. You need to do this to use the remote control for rear projection.
1