For Simplex Systems - Xerox 490 Color Management Manual

Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System

For Simplex Systems

Create a queue that uses the TRC created for the upstream User TRC.
1. On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [Queue Management].
2. Select [New].
3. In the Queue Name field, type [CalibrationConfirmation].
4. Under the Data Format drop-down menu, select [PDF].
5. In the Delete Job After Printing box, select the [Manual] radio button.
6. For Input Process Mode, select the [Spool] and [Do Not Hold Job] radio buttons.
7. For Output Process Mode, select the [Spool] and [Do Not Hold Job] radio buttons.
8. In the Extended Spool box, select the [Enable] radio button.
9. Select the [Paper Setting] tab.
10. Ensure that the Stock Set Name is [SYSTEM_DEFAULT].
11. In the Paper Identifier drop-down menu, select the imposition file [Simplex_PreCal].
5-22 Color Management Guide