Xerox 490 Color Management Manual page 84

Color Calibration Process for v1.1.6 Software
Note
In the following step, while using Inches is recommended, it is not required. Millimeters are
also supported by this documentation.
20. For Unit, select [Inch].
21. In the Width field type [8.50] (216 mm). In the Length field type [12.00] (305 mm).
22. In the Copies drop-down menu, type [10].
23. Select [OK].
5-24
Xerox 490/980 Color Continuous Feed Printing System
Color Management Guide