Table of Contents
Advertisement
Xerox 490/980 Color Continuous Feed Printing System
6. Click into the fourth field down from the top of the window. Delete the _1 from the end of
the filename (ends with .trc).
Note
The TRC Viewer will automatically process the Upstream_1.txt, Upstream_2.txt,
Upstream_3.txt files and average the results. The same process applies to the
Downstream_1.txt, Downstream_2.txt and Downstream_3.txt files.
7. Select [TRC??].
Refresh
Create TRC
8. Select [OK] after the pop-up window appears.
9. Repeat steps 3-8 for the downstream engine using file Downstream_1.txt.
10. Select the bottom right [???] to close the TRC Viewer Software.
Color Management Guide
Color Calibration Process for v1.1.6 Software
Browse for input file
Edit name of TRC
Exit
5-17
Advertisement
Table of Contents
