Use Colorport To Measure Targets - Xerox 490 Color Management Manual

Color continuous feed printing system

Hide thumbs Also See for 490:

Table of Contents

Color Calibration Process for v1.1.6 Software

Xerox 490/980 Color Continuous Feed Printing System

Use ColorPort to Measure Targets

This is to measure the printed test grids using the ColorPort Utility Software.

1. Open the ColorPort Utility Software (v1.5.4).

2. Select the [Measure Target tab].

3. Under the Target drop-down menu, select [ATCN_iSis].

4. Under the Measurement Device drop-down menu, select [X-Rite Eye-One iSis].

5. Select [Connect] and wait for the Eye-One iSis to be ready.

5-12

Color Management Guide

Table of Contents

480 980