Table of Contents
Advertisement
Color Calibration Process for v1.1.6 Software
Note
As a reminder, the queue name used to submit the job in the next step is [Calibration].
37. Reference
B and submit the ColorPort test pattern [ColorPort_iSis] located in the
Appendix
folder [C:\Documents and Settings\[Current Active Windows XP Profile]\Desktop\Color
Calibration Resources] to the printer using Line Printer Remote (LPR). Return to this
procedure when you are finished.
38. The command prompt window should look similar to the following when you are finished
typing:
39. After you have confirmed that you have the appropriate text in the command prompt
window, press <Enter> to submit the job to the printer.
40. Close the command prompt and Windows Explorer windows.
41. Depending on whether you have a simplex system or a duplex system, do one of the
following:
a.
Select the third set of targets from the printer.
b.
Select the third set of targets from the prints done by each printer.
42. Identify and mark the test patterns based on their positions as inboard, middle or
outboard.
43. Cut around the dotted line edge of the test patterns.
5-10
Xerox 490/980 Color Continuous Feed Printing System
Color Management Guide
Advertisement
Table of Contents
