General
Disabling the Solaris Screen Saver
Color Systems
Settings for enhanced color output
System Guide
8 Hints and Tips
This section describes methods for handling workstation issues,
optimizing job performance, and enhancing image quality.
These procedures address workstation display.
To disable the Solaris Screen Saver:
1. Open a Terminal window.
2. Type the following path: cd /usr/openwin/bin.
3. Type dtpower.
4. Select Yes from the Scheme Confirmation window that opens.
The Power Saver screen is displayed.
5. From the Current Power Saver Scheme pull-down menu,
select Disable.
6. Select OK, and close the Terminal window.
The Xerox FreeFlow
new laser technology and other hardware advances.
Set the 200 Line on Queue and calibrate. The 200 Line
produces dramatically better results. Also the level of noise in the
new 200 Line is negligible and produces benchmark results.
Set SWOP Plus Output for CMYK. This simulates the SWOP
press while taking advantage of the digital press gamut.
NOTE: An additional way to improve color output is to use the
profile overrides in Job Properties. This option is available to
systems with override capability.
Print Server software takes advantage of
®
Hints and Tips
8- 1