Table of Contents
Advertisement
CMS Option Tool
Registering Custom Paper
To register custom paper:
1. Enter the Paper Setting. Set Paper Length to 18 inches.
2. Select a colorimetric pattern for color conversion. For color conversion, use Eye-One iSis.
3. The colorimetric pattern will be printed for color conversion. Select [Print] and then select
[OK].
4. Select [OK] in the CMS Option Tool window.
5. Cut out the pattern along the dotted line. Halftone Dot, Error Diffusion, and Upstream/
Downstream. Lead edge black bar and left edge are critical.
6. Measure the patterns using the Eye-One iSis.
a.
Connect to the Eye-One iSis and switch on the power.
b.
Select [Start/Programs/X-Rite/ColorPort/ColorPort1.5.3/ColorPort 1.5.3].
c.
Select [Measure Target] tab.
d.
Select [EyeOneiSis.rnd] under Target.
e.
Select [X-Rite Eye-One iSis] under Measurement Device.
f.
Select [Connect].
g.
Select [No Filter].
h.
Insert the Halftone Dot pattern, and select [Close].
i.
Select [OK] when measurement is successful.
j.
Select [Save Data...].
k.
Select [CGATS] then select [Save].
Save the file as eyeoneisis_up_ht.txt in the My Documents directory.
l.
m. Select [Clear Data...].
n.
Repeat the previous steps for Error Diffusion pattern.
o.
Save file as eyeoneisis_up_ed.txt.
7. In the CMS Option Tool window, select the [Custom Paper] tab.
8. Enter the Media name in the "Enter or select the paper name" field.
9. Browse to the data files that you have created, under "Specify a measured value data file."
There is a data file for Upstream and a data file for Downstream.
10. Select [T01] in the "Select the CMYK ink characteristic" drop down menu. T01 is General
printing and T02 is for Newspapers.
11. Select [Download the paper information to the printer].
12. Select [OK] in the CMS Option Tool window.
2-12
Xerox 490/980 Color Continuous Feed Printing System
Color Management Guide
Advertisement
Table of Contents
