Color Calibration - Xerox 490 Color Management Manual

Color continuous feed printing system
Hide thumbs Also See for 490:
Table of Contents

Advertisement

Color Calibration Using ColorPort Utility Software

Color Calibration

Before performing color calibration, set the cutter to A3 and ensure that all color settings for
both printers are set at 4 (C,M,Y,K).
1. Select the CMS Option Tool icon from the PC-GUI.
2. Select the [Print Colorimetric Pattern] tab.
3. Select the colorimetric pattern to print from the pull-down menu. For Calibration, select
(Eye-One iSis).
4. Select [Print].
5. Select [Yes] to continue. After printing is complete, select one sample of the following test
patterns and cut around the dotted lines neatly:
Test Pattern Names
For Upstream Halftone Dot
EyeOneiSis_up_Calib.rnd_1 (299)
EyeOneiSis_up_Calib.rnd_2 (299)
EyeOneiSis_up_Calib.rnd_3 (299)
For Downstream Halftone Dot
EyeOneiSis_dn_Calib.rnd_1 (299)
EyeOneiSis_dn_Calib.rnd_2 (299)
EyeOneiSis_dn_Calib.rnd_3 (299)
For Upstream Error Diffusion
EyeOneiSis_up_Calib.rnd_1 (299)
EyeOneiSis_up_Calib.rnd_2 (299)
EyeOneiSis_up_Calib.rnd_3 (299)
For Downstream Error Diffusion
EyeOneiSis_dn_Calib.rnd_1 (299)
EyeOneiSis_dn_Calib.rnd_2 (299)
EyeOneiSis_dn_Calib.rnd_3 (299)
6-2
Xerox 490/980 CCF Printing System
Color Management Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

480980

Table of Contents