Kyocera TASKalfa 650c Operator's Manual page 27

1.SETTING UP WIRELESS NETWORK
Selecting WPA/WPA2 security mode with PEAP protocol
Using the WPA/WPA2 with the PEAP protocol, you must install the CA certification file in the equipment. This equipment
uses the user name and password to authenticate the access rights to the wireless network, and the RADIUS server
authenticate this equipment using the CA certification file.
When using the WPA/WPA2 with the PEAP protocol, you must install the CA certification file in the equipment using
COMMAND CENTER first. For instructions on how to install the CA certification using COMMAND CENTER, refer to
COMMAND CENTER Guide.
1 Press the [WPA] or [WPA2] and press the [NEXT].
The AUTHENTICATION SETTINGS screen is displayed.
When the [WPA] or [WPA2] is selected, TKIP or AES(CCMP) can be selected.
Press the [PEAP] and press the [NEXT].
2
The WIRELESS AUTHENTICATION (EAP-TLS) screen is displayed.
Setting PMK cache
When the [WPA2] is selected in step 1, the PMK cache can be switched to ON or OFF. When the [WPA] is
selected, the item for setting PMK cache is not displayed.
1 SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 25