Before Setting Up Wireless Network; Planning For Installation; Determine The Network Type - Kyocera TASKalfa 650c Operator's Manual

1 SETTING UP WIRELESS NETWORK

Before Setting Up Wireless Network

This product is a wireless LAN Module using the 2.4 GHz spectrum diffusion system, and is compatible with IEEE
Standard 802.11g and 802.11b for wireless LAN.
When the Wireless LAN is enabled, users can perform the following printing through the Wireless LAN:
Raw TCP Printing from Windows computers
LPR Printing from Windows computers
LPR Printing from Macintosh computers
LPR Printing from UNIX/Linux workstation
The instructions on how set up the client computers for Wi-Fi printing is same as the instructions for wired network
printing. For instructions on how to set up the client computers, please see Software Installation Guide.
To access the equipment through the Wireless LAN from the client computers, the client computers must have the
Wireless LAN Module.
When you enable the wireless network, the existing NIC (Network Interface Card) will be disabled. This equipment
cannot connect the wired network and wireless network at the same time.

Planning for installation

Before setting up the Wireless LAN Module for your wireless LAN, read through this section to understand the information
that you require to set up the equipment in your wireless LAN.

Determine the network type

This Wireless LAN Module supports Infrastructure Mode and Ad Hoc Mode.
Infrastructure Mode
In the Infrastructure Mode, client computers can access to the equipment through a wireless network via an Access Point.
The Infrastructure Mode is suitable for the wireless network that many client computers are connected at the same time.
The Access Point will be required to establish the wireless network in the Infrastructure Mode.
Ad Hoc Mode
In the Ad Hoc Mode, client computers can access to the equipment directory through a wireless network without an
Access Point. The Ad Hoc Mode is not suitable for the wireless network that many computers are connected, however, it
is easy to establish the wireless network because the Access Point is not required.
10

Before Setting Up Wireless Network

Access Point