1 SETTING UP WIRELESS NETWORK
Specify the following items and press the [NEXT].
7
ENCODING FORMAT
Select the encoding format of the CA certification file.
[CA CERTIFICATE]
Press this to enter the file name of the CA certification file that you install in the equipment using COMMAND
CENTER. If the specified certification file is not installed in the equipment, the error message to input correct file
name will be displayed.
When pressing the [CA CERTIFICATE], the letter entry screen is displayed. Enter the value using the keyboard
and digital keys, and press the [OK] to set the entry.
Specify the following items and press the [NEXT].
8
FULL AGREEMENT of SERVER NAME
Select the [ON] to confirm whether the RADIUS server name in the server certification file and the input RADIUS
server name is same or not. When the [ON] is selected, press the [RADIUS SERVER NAME] to enter the RADIUS
server name.
In the RADIUS SERVER NAME, enter the user name in "Server Name@FQDN" format.
Example: wlanserver@km.com
ENCRYPTION INTENSITY
Select the encryption intensity.
22
Setting Up the Infrastructure Mode