Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 59

If you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
Symptom
No picture in the EVF or LCD Monitor ._
Video cassette can't be inserted ...
Video cassette can't be removed ...
No operation starts when operation buttons
are pressed ...
Recording cannot be done ...
Correction
• Make sure the Power Source is connected.
(pp. 11, 12)
• Make sure the POWER switch is set to ON.
(pp. 27, 32)
• Check the Dew Indicator. (p. 23)
• Make sure the battery is fully charged. (p. 10)
• Make sure all necessary cables are connected
correctly and firmly. (p. 12)
• Make sure the Lens Cap is removed. (p. 27)
• Make sure the Power Source is connected.
(pp. 11, 12)
• Insert the cassette with the window side facing up.
(p. 13)
• Make sure the Power Source is connected.
(pp. 11, 12)
• Check the Dew Indicator. (p. 23)
• Make sure the record tab is closed. (p. 14)
• Check the Battery Indicator. (p. 20)
• Check the Dew Indicator. (p. 23)
Auto Focus does not operate ... ° Make sure the FOCUS is set to AUTO. (p. 44)
• Make sure the unit is ON with CAMERA mode.
(p. 27)
Sound from microphone can't be monitored ... • Make sure the unit is set to REC or Record/Pause
mode.
Sound can't be heard ... • Make sure the Audio on the VCR MENU is set to
ST1. (pp. 19, 48)
For assistance, call 1-800-211-PANA(7262) 59