Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 16

The Palmcorder features two menu
displays: one for camera mode (recording)
and the other for VCR mode (Playback).
Displaying the MENU
Before you begin...
• Connect the Palmcorder to a power source.
• Set the POWER Switch to CAMERA.
• While the Menu screen is displayed, you
cannot record or play the tape.
• While recording, the Menu screen will not
be displayed.
• While in playback, the Menu screen can
be displayed.
1 Press the MENU Button to display the
CAMERA menu.
2 Set the POWER Switch to VCR to
change to the VCR menu if desired.
Setting the MENU Items
Rotate the SELECT SET WHEEL to
select a menu item.
MENU Button
SELECT SET
WHEEL
3
• The character of your selection will be
inversely displayed.
(1 FUHCTtON e.k 'I'1
Press down on the SELECT SET
WHEEL to set your selection.
• The "e" mark will indicate your
selection.
Press MENU Button to exit from the
display.
Note:
• Rotate the SELECT SET WHEEL to
display additional lines.
• If you select ALL at COLLAPSE, then
return to main menu.
I°
( COLLAPSE •ALL)
It FUNCTION _•_)
(2 CAMER& ADJUST _I'P)
(3 REC MODE '_1÷)
(4 DISPLAY SETTING ',_e_i ')
• If you select desired item from the main
menu, detailed items will show up on the
screen.
16
For assistance, call 1-800-211-PANA(7262)