Download Print this page

Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 58

Digital video camcorder
Hide thumbs Also See for Digital Palmcoder PalmSight PV-DV900:

Advertisement

Clogged Video Head
(a) Video Head Cleaning:
Normally, your Palmcorder will not
require head cleaning. However, it is possible that the heads
may become clogged due to dust in the air, damaged
tape,
long term use, etc. If "NEED HEAD CLEANING"
appears for 5
seconds in the EVF or LCD monitor, the heads may require
cleaning.
(b) Cleaning
the Heads:
It is recommended
that head cleaning
be performed
by a qualified service technician.
Please contact
your nearest Panasonic Service Center. An alternate solution is
to obtain a head cleaning cassette.
Please use Panasonic
cleaning cassette (AY-DVMCL).
Be sure to follow the cleaning
instructions carefully. Excessive
use of the cleaning cassette
could shorten head life.
Use this cassette only when a head clogging symptom occurs.
Refer servicing to qualified service personnel.
|o_.Tfl
q[o)am (o] da _l D[_EOJ i[_ _.1 | [o] a_-,ai
• When you go from function
to function
(PLAY,
FF, REW etc.), please note that the unit
will not accept
a new function
operation
until the previous
operation
is complete.
• The POWER
Button,
and all function
buttons,
(PLAY,
FF, REW, etc.) are only operational
after the tape has been completely
loaded.
• With a Wide or Telephoto
Conversion
Lens (optional)
attached,
the four corners
of the
screen may darken when zoom is set to maximum
wide angle.
• Attaching
the lens hood, a Wide or Telephoto
conversion
lens (optional),
etc. after a filter
(optional)
has been attached,
the four corners
of the screen may darken when zoom is
set to maximum
wide angle.
• With two filters (optional)
attached,
the four corners
of the screen may darken
when
zoom is set to maximum
wide angle.
If any of the following
numbers appear
on-screen,
the camcorder
may have a problem.
Do not remove the battery
(if attached)
and write down the displayed
number
on page 60.
Then, take the camcorder
to a service
center for repair.
• F01
• F02
• F03
• F04
• F05
• F31
• F51
° F52
* U10
• U11
58
For assistance,
call 1-800-211-PANA(7262)

Advertisement

loading