Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 43

II . Tii II a,ui[. i[.1
Use the following features to add interest and professionalism to your recordings. Select
from nine special effects.
Jl
1 In Camera mode, press MENU to
MENU Bu_on SELECT SET WHEEL
Types of Digital Effects
display the menu screen.
Rotate the SELECT SET WHEEL to
select D.FUNCTION or D.EFFECT.
Then, press down on the SELECT
SET WHEEL repeatedly to select one
of the Digital Functions listed below.
To cancel the Digital Function, press
down on the SELECT SET WHEEL to
select OFF.
Note:
• The EIS and Digital Zoom features must
be turned off in order to use Digital
Functions.
WiPE
Successive scenes are separated in a way
which simulates the drawing of a curtain.
MIX
The current scene is mixed in with the
following scene during scene changes.
STROBE
The recording appears as a sequence of
still frames.
GAIN UP
Picture sensitivity is increased.
• Only Manual Focus is available.
TRAIL
The subject being recorded creates a trail
when in motion.
NEGA (Neg/Pos)
The recorded picture is inverted to appear
as a film negative.
SEPIA
The picture is recorded in sepia, brownish
color, giving it an antique look.
MONO (Monotone)
The picture is recorded in black-and-white.
SOLARI (Solarization)
The scene takes on a appearance similar
to an oil painting.
To use the WIPE:
a. In Camera mode, set the "D.FUNCTION"
item in the menu screen to "WIPE" (page
17).
b. Press the RECORD/PAUSE to start
recording.
c. Press the RECORD/PAUSE to pause the
recording. The last scene will be
memorized.
d. Press the RECORD/PAUSE to start
recording again. The new scene will take
the place of the memorized scene.
To use the MIX:
Perform steps a-d above. The memorized
scene and the new scene will appear mixed
as the scene changes from one to the
other.
For assistance, call 1-800-211-PANA(7262)
43