Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 15

The date and time is calculated, including
leap year, up to DEC 31 2089.
MENU Button
-- EXAMPLE:
4,
SELECT SET
WHEEL
:1998
"_" Rotate
:1999
-(_EE)- Push
nm_ml]m
:JAN
Before you begin...
• Connect the Pslmcorder to a power source.
• Set the POWER switch to CAMERA.
1
2
Press MENU to display the Camera
Mode menu screen (see page 17).
Rotate the SELECT SET WHEEL to
select CLOCK-SET.
3
4
Press SELECT SET WHEEL down to
select CLOCK-SET ON. The DATE/
TIME SETTING menu appears.
Rotate the SELECT SET WHEEL to
select the desired numbers, then,
press SELECT SET WHEEL down to
fix that portion and move to the next.
Adjust the shaded items for the Year,
month, day, hour, and minute.
M_NTH : 1999
: JAN
DAY : 29
HOUR : 12AM
MINUTE : 34
When time setting is completed, press
the MENU Button to start the clock.
Note:
• If you should pass the current year,
continue pressing down on the SELECT
SET WHEEL until the year appears again.
• A built-in battery maintains clock
operation. If the Palmcorder is not
connected to a power source for a few
months, the built-in battery may discharge
and "CLOCK BATTERY" indication
appears (see page 23).
For assistance, call 1-800-211-PANA(7262) 15