Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 11

Insert the Battery and slide it down until it
locks with a click.
Note:
• The EVF is a fixed type and cannot be
extended or retracted. DO NOT apply
force.
• Do not lift or carry the Palmcorder by the
EVF or by the LCD Monitor.
To remove the Battery:
Slide the Battery upward while sliding the
BAI-FERY RELEASE Button.
BATTERY RELEASE Button
Caution:
• Charge only with specified charger.
• The Battery can be charged within a
temperature range of 32 ° F (0° C) and 104 ° F
(40 ° C).
• The Battery may be warm after charging or just
after use. This is normal.
• Do not use an insufficiently charged or worn
out Battery.
• In extreme cold surroundings, Battery charging
time will increase.
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery with specified models only.
• If the Battery is used in extremely high
temperatures, a safety device wil! automatically
prevent operation.
Safety precautions:
• Do not get the Battery near, or dispose of in
fire.
• Do not directly connect (short circuit) the
positive (+) and negative (-) terminals.
• Never attempt to disassemble or reassemble
the Battery.
For assistance, call 1-800-211-PANA(7262)
To insure longer battery life:
• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place. If you leave the Battery
in the Palmcorder or on AC Adaptor, the
Battery will no longer be rechargeable,
• Keep the Battery terminals clean.
11