Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 55

When you remove the Lens Hood, pinch the Lens Hood
and turn it counterclockwise.
Then attach an optional filter or lens.
• Be careful not to touch the lens itself.
• Replace the Lens Hood after removing the accessory.
B
I[_ [_.] =H =[_ m_vJ;1111 =1 F4 i_.pi F, ivi [=_vJ i l=[,_1_ --
A
Screw Driver
Eyepiece screw
1 Remove the EVF Eyepiece 2
screws with a screwdriver (+).
2 Turn the Eyepice
counterclockwise 1/8 of a turn.
B
A
3
Pull the Eyepiece free.
Remove any lint or dust particles
with a soft clean cloth being careful
not to scratch the glass surfaces.
4
To re-install the Eyepiece
Line up the marks on the Eyepiece
with the grooves inside the EVF
shaft and attach. Turn it
clockwise 1/8 of a turn to lock in
place.
5
Replace the EVF Eyepiece screws
and tighten with a screwdriver.
• If you lose EVF Eyepiece screw,
order Part No.XQN2+BJ4FXK
for replacement.
Note:
• The EVF is a fixed type and cannot be extended or retracted. DO NOT apply force.
• Adjust the focus with the Vision Adjustment Control before use.
For assistance, call 1-800-211-PANA(7262) 55