Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 44

The Palmcorder automatically adjusts the focus over the entire zoom range.
Use Manual Focus
(MF)
when recording ...
• a subject through glass.
• a scene where the subject is far from the
Palmcorder and there are objects in the
foreground.
• a subject with distinct horizontal stripes.
• a subject not centered in the Viewfinder.
• subjects with shiny surfaces.
• an obliquely angled subject.
POWER ZOOM
Switch
• a bright, flat subject such as a white wall.
• in low light situations.
• a scene with fast motions, like a golf swing.
• Re-focusing may be required
when your Palmcerder is aimed at a new
scene,
Press MANUAL FOCUS so that "MF'
(Manual Focus) appears in the EVF or
the LCD monitor.
EVF/LCD Monitor
2
Press and hold the POWER ZOOM
Switch to the "T" side (Full
Telephoto) until the lens is zoomed in
all the way (subject at maximum size),
Turn the MANUAL FOCUS control
until the picture is in focus.
• It may be necessary to back away
from the subject to focus the image
properly.
Press the POWER ZOOM switch to
"W" or "T" as desired.
• The subject will remain in focus over
the entire zooming range.
• It may be necessary to back away
from the subject to focus the image
properly.
• iT/P-.[H Ko]I _roI H ! !>1 i I[O] i e] [o]_[=_ ! I !Jp_,l i
Press the "W" side of the POWER ZOOM Switch to the wide angle position.
Auto Focus will function with the subject as close as 1 inch (25mm) in front of the lens,
44
For assistance, call 1-800-211-PANA(7262)