Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 3

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your ._._][_rPalmcorder is designed to record and play back in Standard Play (SP) mode only.
This Palmcorder is equipped with the HQ System to provide excellent video pictures. It is
recommended that only cassette tapes that have been tested and inspected for use in VCR
machines with the M_n_[_T mark be used.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol warns the
voltage within the unit may have sufficient
magnitude to cause electric shock.
Therefore, it is dangerous to make any kind
of contact with any inside part of this unit.
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in orde_
to avoid any problems.
The above markings are located on the appliance bottom cover.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with Part 15 and part 18 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when operated in a residential environment.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location
and/or utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may
find the booklet, 'Something About Interference' available from FCC local regional offices
helpful.
FCC Warning: To assure continued FCC compliance, use only the shielded interface
cable with ferrite cores provided with Adaptec products, use only the
shielded interface cable with Radius products when connecting digital
video camera and computer.
Also, any unauthorized changes or modifications to this equipment would
void the user's authority to operate.
For assistance, call 1-800-211-PANA(7262) 3