Panasonic Digital Palmcoder PalmSight PV-DV900 Operating Instructions Manual page 29

To play back the final few seconds of the last recorded scene in the Recording Pause
Mode.
Press the EDIT SEARCH Button
briefly in the recording Pause Mode.
The [CHK] indication appears.
After checking, the Movie Camera returns
to the Recording Pause Mode.
• For Recording Check, the Movie Camera
must be in the same mode (SP or LP) as
used for recording, otherwise the
playback picture is distorted.
EDIT
SEARCH
You can visually search for scenes in
CAMERA mode to maintain proper
continuity when taping.
RECORD/PAUSE
Button
POWER Switch
EDIT EDIT
SEARCH "<1<1 SEARCH
Set POWER Switch to CAMERA.
2
3
In RECORD/PAUSE mode, hold
down EDIT SEARCH _ to perform
a forward visual search or EDIT
SEARCH <1<1 to perform a reverse
visual search. Releasing the button
stops the search.
Press RECORD/PAUSE to continue
recording.
Record Review:
Press EDIT SEARCH _ once while in
Record/Pause mode to review the last few
seconds of your recording.
Note:
• During Edit Search, the picture will
become mosaic in both search, the sound
will be muted in reverse visual search.
• Make sure the SP/LP tape speed setting
is the same as the recording to eliminate
distortion during edit search.
For assistance, call 1-800-211-PANA(7262)
29