Dpof Setting - Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual

Editing still pictures
Q
You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD
card.
/_ Rotate the mode dial to select _.
1 Press the MENU button, then select
[1_ PLAY SETUP] --_ [=_ DPOF SET] --_ [SET] and
press the joystick,
2 Select the file to be set, then press the joystick.
The number of prints set to be in DPOF is displayed.
3 Move the joystick up or down to select the number of prints, then
press the joystick.
• You can select from 0 to 999. (The selected number of pictures can be printed with the printer
supporting DPOF.)
• To cancel the setting, set the number of prints to [0].
• You can also select multiple files in succession.
To complete the settings
Press the MENU button.
To cancel all DPOF settings =m
Press the MENU button, then select [[_ PLAY SETUP] > [ _ DPOF SET] _ [CANCEL ALL] and
"O
press the joystick. LU
• When the confirmation message appears, select [YES], then press the joystick.
• What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to be written
onto an SD card so that it can be used on a system supporting DPOF.
• The DPOF setting can be established for up to 999
flies.
• DPOF setting made on other devices may not be
recognized by this unit. Please perform the DPOF
settings on this unit
• You cannot add the recording date to pictures to be
printed with the DPOF settings
97
LSQT1011