Table of Contents
Advertisement
LSQT1212_GC(EN).book 169 ページ ２００７年２月１５日 木曜日 午前１０時１３分
1
Press the MENU button, then
select [PHOTO SETUP] # [LOCK
SET] # [YES] and press the
joystick.
2
Select the file to be protected,
then press the joystick.
[
] display appears and the selected file is
locked.
≥ Press the joystick again to release the lock
setting.
≥ You can also select multiple files in succession.
To complete the settings
Press the MENU button.
DPOF setting
This is for writing the printing data on
an SD card.
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬ Rotate the mode dial to select
¬ Select [SD CARD] in [MEDIA
SELECT].
1
Press the MENU button, then
select [PHOTO SETUP] #
[DPOF SET] # [SET] and press
the joystick.
MENU
2
Select the file to be set, then
press the joystick.
The number of prints set to be in DPOF is
displayed.
3
Move the joystick up or down to
select the number of prints, then
press the joystick.
≥ You can select from 0 to 999. (The selected
number of pictures can be printed with the
printer supporting DPOF.)
≥ To cancel the setting, set the number of prints
to [0].
≥ You can also select multiple files in succession.
To complete the settings
Press the MENU button.
[SD]
To cancel all DPOF settings
Press the MENU button, then select
[PHOTO SETUP] # [DPOF SET] #
[CANCEL ALL] and press the joystick.
≥ When the confirmation message appears,
.
select [YES], then press the joystick.
∫ What is DPOF?
DPOF stands for Digital Print Order Format. This
enables picture printing information to be written
onto an SD card so that it can be used on a
system supporting DPOF.
Editing
MENU
169
LSQT1212
Advertisement
Chapters
Table of Contents
