Recording Motion Pictures - Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual

o
o
Recording motion pictures
Recording motion pictures
Record motion pictures onto a disc.
• When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with
a wide-screen TV.
To watch images on a regular TV (4:3), change the aspect ratio setting (4 66) before recording
the images or when watching them on the connected TV (4 105).
• (VDR-D250 only) Remove the lens cap before turning the unit on.
If the unit is turned on with the lens cap attached, the automatic white balance adjustment may
not function properly.
1 Turn the unit on.
Rotate the mode dial to select m.
(VDR-D300 only) The lens cover opens
automatically.
3 Open the LCD monitor or extend the viewfinder.
4 Press the recording start/stop
button to start recording.
To end the recording
Press the recording start/stop button again to
pause recording.
• [O] and [11] are red during recording. Do
not move this unit until [11] is green.
• The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
• When about 5 minutes have passed without any operation in recording pause, the unit
automatically turns off to prevent the battery from running down. When you want to use the unit,
turn it on again.
This setting can also be set to [OFF]. (_ 144, POWER SAVE)
50
LSQT1011