Adjusting Lcd Monitor/Viewfinder - Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual

Adjusting L CD monitor/viewfinder
Adjusting LCD monitor/viewfinder
1 Press the MENU button, then select [ _[_SETUP]
--_ [r-_. LCD SET] or [ _ EVF SET] --_ [YES] and
press the joystick.
Move the joystick up or down to select the item to
be adjusted. Then, move the joystick left or right
to make the adjustment.
The bar display moves.
[r-_. LCD SET]
-_ : Brightness of the LCD monitor
_) : Color level of the LCD monitor
[ E"AVVF EVF SET]
EVF_ : Brightness of the viewfinder
• To adjust the brightness of the viewfinder, close the
LCD monitor and extend the viewfinder to activate
it
• When the LCD monitor is rotated by 180 ° towards
the lens, the brightness and color levet of the LCD
monitor cannot be adjusted.
• These settings will not affect the images actually
recorded
• In order to increase the brightness of the entire LCD monitor
Press the POWER LCD button.
The [_] indication appears on the LCD monitor.
• The entire LCD monitor will become approx, twice
as bright as usual.
O.
U'J
• When the POWER LCD button is pressed again,
the [_, ] indication disappears and the original
brightness is restored
• This will not affect the images to be recorded.
• If you turn on the unit when the AC adaptor is used,
this function will automatically be activated.
Adjust the focus by sliding the eyepiece
corrector knob.
12.15.2006
47
LSQT1011