Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual page 17

Parts identification and handling
Put the strap through the fixture 0 and
through the stopper _ so it will not come
off. Extend part _) by at least 2 cm (1").
Put the opposite end of the strap through O
and attach it in the same way,
In order to remove the lens hood, rotate it counter-clockwise O- In order to attach it, place into slot
0, and then rotate it clockwise (_.
• (VDR-D300 only) The lens hood has a built-in lens cover.
F °
,m
o
m
17
LSQT1011