Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual page 155

Troubleshooting
• The data may be destroyed. It may have been destroyed by
card do not look normal, static or electromagnetic waves. Store important data on a
computer or other products as well.
Even if a disc or a card is • Either this unit or the disc or card may be damaged. Please
formatted, it cannot be consult a dealer. Use an SD Memory Card from 8 MB to
used. 2 GB with this unit.
• Is this unit connected to a computer?
No operation can be performed oil this unit when it is
The indication
connected to a computer.
• Turn off the power to this unit, If the power cannot be
turned off, press the RESET button, or remove the battery
or AC adaptor and then reattach it. After that, turn on the
No operation can be power again. If normal operation is still not restored,
Performed" detach the power connected, and consult the dealer who
you purchased this unit from.
• The unit has automatically detected an error. Press the
RESET button with the projecting part of the grip belt O.
This will restart the unit.
©-RESET
"PUSH THE RESET i_!
%=
SWITCH." is displayed.
• If you do not press the RESET button, the power to this
unit is turned off automatically about 1 minute later.
• Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the
appliance by yourself.
=_
O
155
LSQT1011