Dpof Setting - Panasonic VDR-D160GC Operating Instructions Manual

LSQT1182(GC ENG).book 193 ページ ２００７年１月１８日 木曜日 午後４時４４分

DPOF setting

This is for writing the printing data on an SD card.
You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD
card.
¬ Rotate the mode dial to select
1 Press the MENU button, then select
PLAY SETUP] # [
[
press the joystick.
2 Select the file to be set, then press the joystick.
The number of prints set to be in DPOF is displayed.
3 Move the joystick up or down to select the number of prints, then
press the joystick.
≥ You can select from 0 to 999. (The selected number of pictures can be printed with the printer
supporting DPOF.)
≥ To cancel the setting, set the number of prints to [0].
≥ To set other files, repeat steps 2–3.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select [
press the joystick.
≥ When the confirmation message appears, select [YES], then press the joystick.
∫ What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to be written
onto an SD card so that it can be used on a system supporting DPOF.
≥ The DPOF setting can be established for up to 999
files.
≥ DPOF setting made on other devices may not be
recognized by this unit. Please perform the DPOF
settings on this unit.
.
DPOF SET] # [SET] and
PLAY SETUP] # [ DPOF SET] # [CANCEL ALL] and
≥ You cannot add the recording date to pictures to be
printed with the DPOF settings.
Editing still pictures
(SD)
193
LSQT1182