Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual page 129

Creating a DVD-Video disc on a computer (Windows)
When the [CollectTool] screen appears, click [OK].
The exported scene will be automatically registered on the DVDfunSTUDIO
editing screen.
10 Edit the DVD menu as required.
• Set the disc size to [8 cm DVD].
11 Click [Burning].
Writing to DVD-RW/DVD-R disc will start.
When writing is complete, the disc is ejected automatically.
• The DISC EJECT lever on this unit does not work
when the unit is connected to a computer. Use the
software's eject button to eject the disc (When not
using the software, use Windows Explorer to right-
click the drive icon for this unit and select [Eject].
• Title names set using DVD-MovieAIbumSE cannot
be displayed on this unit. Also, the names of
playlists created on this unit cannot be displayed on
DVD-MovieAIbumSE
• If you export an image recorded in 16:9 aspect ratio
with DVD-MovieAtbumSE, it is saved as a 4:3
aspect image that has been squeezed horizontally.
If you then use the exported image with
DVDfanSTUDIO, it is displayed as a 16:9 aspect
image
• The DVD menu created with DVDfunSTUDIO does
not appear on this unit. Play back the disc on a DVD
player.
• You cannot add data to a disc written to with
DVDfunSTUDIO as the disc is finalized after writing
Take care that the temperature of the unit, when connected to a computer, does not rise excessively [reference for usage: approx. 30 minutes at about 30 °C (86 °F)].
E
O
129
LSQT1011