Disassembly and Assembly
3.2.1 Upper Housing Removal
1. Remove the knob,
tip of the PG adjust
2. Using tweezers, release the hooks which fixes the tractor unit to the printer mechanism. Then remove
the tractor unit by lifting up the rear part of the tractor unit.
3. Open the ink cartridge cover and release the hooks fixing the panel unit to the upper housing by
inserting the tweezers into the cutouts in the illustrated part of the panel unit. Then disconnect the
connector cable for the panel unit from the panel unit and remove the panel unit.
3-4
lever, rear sheet guide, stacker and paper support.
Figure 3-2. Tractor Unit Removal
Figure 3-3. Panel Unit Removal
Rev. A