4.1.9.1 PQ Sensor Adjustment
Follow the steps exactly in the way instructed. Otherwise the fatal error will occur.
Inaccuracy in this adjustment does not guarantee the proper operation of the printer.
1. Enter the "Sensor Check" menu. (See Section 4.1.9.)
2. Move the cursor using
3. Move the cursor using
4. Remove paper and press "Return" key.
5. Set a stack of paper * or the paper quantity detective adjust tool on the right edge guide in the ASF.
Then press "Return" key, and the Sensor check menu appears.
Figure 4-10. Setting the Paper Quantity Detective Adjust Tool
Note) Stack of paper:
Rev. A
CAUTION
or
key to select "1.CR-PWS" and press "Return key.
or
key to select "2. ASF Quantity". and press "Return" key.
With a thickness of 9 mm to 9.1 mm or approximately 100 sheets of 64-g paper
(17-lb. paper)
EPSON Stylus COLOR 3000
4-17