Table of Contents
Advertisement
Product Descriptions
1.3.7 Adjust Lever
The adjust lever, located at the right and upper side in the printer cover, is used to adjust the gap between
the paper and platen. The adjust lever must be set to the proper position according to the paper type to
avoid ink smudging caused by ink's contact with paper.
Paper Type
Cut sheet
Transparency
Continuous paper
Envelopes
Index card
1-12
Table 1-16. Adjust Lever Position
Lever Position
Far side (0)
Near side (1)
Figure 1-6. Adjust Lever Settings
Platen Gap Adjustment
Value
0 mm
+ 0.7 mm
Rev. A
Advertisement
Chapters
Table of Contents
