Counting The Number Of Pages Printed - Kyocera TASKalfa 300i Operation Manual

Counting the Number of Pages Printed

This counts the number of pages printed. Counts are classified into Total Job Accounting and Each Job
Accounting. A new count can also be started after resetting the count data which was stored for a certain period
of time.
Types of the counts are as follows.
Item
Printed Pages
Scanned Pages
FAX Transmission Pages*
FAX Transmission Time*
* Only displayed when the optional fax kit is installed.
Total Job Accounting/Resetting the Counter
This counts the number of pages for all accounts and resets the counts for those accounts together at the same
time.
Use the procedure below to check and reset the counter.
Displays the number of pages copied and printed, and the total
number of pages used. You can also use [Count by Paper Size] and
[Count by Duplex/Combine] to check the number of pages used.
• For copying, you can check the pages used for black and white
copying.
• For printing, you can check the pages used for black and white
printing.
• You can use [Count by Paper Size] to check the number of
pages used in the paper size set in Counting by Paper Size on
page 11-25 as well as the number of pages used in other paper
sizes.
• You can use the [Count by Duplex/Combine] to check the
number of pages used in Duplex (1-sided) mode, Duplex (2-
sided) mode and the total for both, as well as the pages used in
Combine (None) mode, Combine (2in1) mode, Combine (4in1)
mode and the total for all three.
Displays the number of pages scanned for copying, faxing* and
other functions, as well as the total number of pages scanned.
Displays the number of pages faxed.
Displays the total duration of fax transmissions.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
11-23
Detail
Management
11