Kyocera TASKalfa 300i Operation Manual page 250

Density
Set the default density. The available default settings are shown below.
Item
Manual (Normal 0)
Auto
Use the procedure below to select the default density.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default density.
4
Press [OK].
Zoom
Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available
default settings are shown below.
Item
100%
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default zoom setting.
4
Press [OK].
File Name Entry
Set an automatically entered name (default) for jobs. Additional information such as Date and Time and Job No.
can also be set.
NOTE:
Refer to page 4-35 and page 5-25 for name entry.
Use the procedure below to set the default file name.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Press [File Name] to enter the file name in not more than 32 characters.
Set to (Normal 0) in the Manual density.
Set to Auto density.
], [Next] of Function Defaults, [
Copy (send/save) at actual size (100%).
Automatically reduce or enlarge the originals to match paper size/
sending size.
], [Next] of Function Defaults, [
], [Next] of Function Defaults, [
8-18
Default Setting (System Menu)
Description
] and then [Change] of Density.
Description
] and then [Change] of Zoom.
] and then [Change] of File Name Entry.