Clearing Staple Jams
1
Pull out the staple holder referring to steps 1 and 2
of Adding Staples.
2
Holding the knob A on the face plate of the staple
holder, lift the face plate.
A
3
Clear the staple jammed in the cartridge end
(staple-loaded side).
4
Lower the face plate of the staple holder.
5
Insert the face plate back in place. When fully
inserted, the face plate locks with a clicking sound.
6
After lifting the staple unit slightly, lower it and
insert it again into its place.
7
Close the stapler front cover.
Appendix-7
Appendix