Kyocera TASKalfa 300i Operation Manual page 262

Entry Check for New Destination
When adding new destination, display the entry check screen to check the entered destination. The table below
shows the available settings.
Item
Off
On
Use the procedure below to set the destination check before send.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Entry Check for New Dest.
3
Select [Off] or [On].
4
Press [OK].
Setting the Default Send Screen
Use this procedure to set the default screen displayed when you press the Send key.
The table below shows the available settings.
Item
Destination
Address Book
Use the procedure below to set the default send screen.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Default Screen.
3
Press [Destination] or [Address Book].
4
Press [OK].
Do not display the entry check screen.
Display the entry check screen.
Displays the destination screen when the Send key is pressed
(screen for sending).
Displays the address book when the Send key is pressed
8-30
Default Setting (System Menu)
Description
Detail