Paper Selection - Kyocera TASKalfa 300i Operation Manual

Paper Selection

Select the paper source that contains the required paper size.
NOTE:
Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper
Settings on page 8-4).
Selecting the Cassette
Use the procedure below to select the paper supply cassette.
Ready to copy.

Paper Selection

Place original.
Original : ---
Zoom : 100%
---
Paper :
Preview
Add Shortcut
Status
Copies
Auto
Letter
Letter
Plain Plain
Ledger MP Tray
Setting
Plain
Letter
Plain
Letter
Plain
Cancel OK
08/80/2009 10:10
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Paper
Selection].
4
Press the key of the paper source corresponding to
the required paper size. The cassette in which the
paper is loaded is selected.
If [Auto] is selected, the paper matching the size of
the original is selected automatically.
5
Press [OK].
6
Press the Start key to start copying.
4-4
Copying Functions