Send And Print; Send And Store - Kyocera TASKalfa 300i Operation Manual

Send and Print

When you send originals, this feature allows you to print a copy of the document being sent.
The procedure for using Send and Print is explained below.

Send and Store

When you send originals, this feature allows you to store a copy of the document being sent in a Custom Box.
The procedure for using Send and Store is explained below.
Ready to send.
Place original.

Send and Store

Custom Box
Off
No. Name
On
0006 06 BOX001
0007 07 BOX002
0008 08 BOX003
0009 09 BOX004
0010 10 BOX005
Add Shortcut
Status
Destination
Used Area
6%
4%
8% 2/2
4%
Detail
2%
Cancel OK
08/08/2009 10:10
5-30
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Send and Print].
4
Press [On].
5
Press [OK].
6
Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is printed.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup], [
Store].
4
Press [On].
5
Select the Custom Box in which the copy is to be
stored.
If a password entry screen for the Custom Box
appears, enter the password.
You can view information on the selected Custom
Box by pressing [Detail].
6
Press [OK].
7
Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is stored in the specified Custom Box.
Sending Functions
], and then [Send and