4
Select Output Tray.
For [Finisher Tray], select [Face Up] (print surface up) or [Face Down] (print surface down) as the paper
orientation at output.
5
Press [OK].
6
When selecting [Face Up] (print surface up) as the paper orientation at output, press [Page Order with Face
Up] and then select the order of the output pages from [Ascending] or [Descending].
NOTE:
Selecting [Descending] accelerates the starting time of copying.
7
When changing the output tray of Copy/Custom Box, move to the copy or document box screen and press
the Reset key.
Orientation Confirmation
Select whether to display a screen for selecting the orientation of the originals to be placed on the platen when
using the following functions. (For more information, refer to page 4-10 for Original Orientation.)
•
Duplex
•
Margin/Centering originals
•
Border erase
•
Combine mode
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].
Function Defaults
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as
defaults makes subsequent jobs easier.
IMPORTANT:
When you have changed the defaults, to enable the change immediately, move to the copy, send,
or document box screen and press the Reset key.
•
Memo mode
•
Page numbering
•
Booklets
•
Staple (optional feature)
8-14
Default Setting (System Menu)