Cutting Canvas And Other Media With The Utility Cutter - Epson Pro 9000 Printer Manual

1-14 | Handling Paper and Other Media
Warning
To avoid injury, use caution
when handling the utility
cutter.

Cutting Canvas and Other Media with the Utility Cutter

Canvas, vinyl, and other heavy media can damage the printer's built-in
cutter. Make sure you choose the
control panel before you print. If you're using the EPSON Stylus Pro 9000,
you can cut the media with scissors or a utility knife.
If you have the EPSON Stylus Pro 9500, you can follow these steps to use
the utility cutter that came with the printer:
1. Press the
Cut/Eject
the printer.
2. Press one of the
Paper Feed
track.
3. Place the utility cutter on the guide track, then slide it along the track to
cut the canvas.
4. After cutting, press the
need to reload the canvas (or other material) to position it correctly for
printing.
1-14
Roll Cutter Off
button to feed the canvas or other material out of
buttons to position the canvas on the guide
button to return to ready mode. You may
Pause
setting on the printer's
guide track