Epson Pro 9000 Printer Manual page 131

C-4 | Using EPSON Drivers and Utilities for Windows
Note
If the New Hardware
Found screen or any
other wizard appears,
click Cancel and follow
the steps given here. If
the Digital Signature Not
Found screen appears
(in Windows 2000),
click Yes.
The installer starts automatically:
If it doesn't start, double-click
CD-ROM icon.
3. Double-click
Install Stylus Pro 9000
sure you choose the right one.) Then follow the instructions on the
screen.
4. If you're using Windows 95 or Windows NT, continue with step 5.
If you're using Windows 98 or Windows 2000, follow the on-screen
instructions to turn on your printer. The printer port configuration
starts automatically. If you're using a USB interface, the USB device
driver installation starts automatically.
If you see an error message, your drivers may not be installed correctly.
For more information, see Chapter 4 in this guide or "Troubleshooting"
in the electronic Reference Guide on your printer software CD-ROM.
5. When you see the "installation complete" message, click
your system if necessary.
C-4
. Then double-click your
My Computer
or
9500 Printer Driver
. (Make
and restart
OK