4-10
|
Resolving Problems
Caution
Use the paper guides only
if paper is curled and
doesn't feed properly.
Otherwise, the paper
guides may damage
your prints.
Make sure the printer isn't located in a brightly lit area. The paper
•
sensor may not be able to operate correctly.
Make sure the
•
Print Mode
media you're printing on.
Make sure the platen gap setting is correct for the paper or media you're
•
printing on. See page 1-20 for more information.
If you're not using EPSON media, make sure you register and select
•
your paper's thickness. See page 1-25 for more information.
Solving Roll Paper Feed Problems
If your roll paper is curled too tightly and doesn't feed out of the printer, you
can use the three paper guides. Extend the guides as shown below:
4-10
or
setting is correct for the
Media Type