Epson Pro 9000 Printer Manual page 157

C-30 | Using EPSON Drivers and Utilities for Windows
4. Click the
Speed & Progress
5. Select from the following options:
• High Speed Copies
same document using hard disk space as a cache. If you have
multiple hard drives, you can select a high speed copy folder for
storing copies.
• Show Progress Meter
Meter is displayed when you send a print job.
• EPSON Printer Port
optimize the transfer rate of your printer port for EPSON printers
instead of using the Windows default printer port. You may see one
of these messages beneath the
High speed (DMA) transfer enabled
using fast DMA transfer mode.
For higher data transfer rates, use DMA transfer
that you can speed up printing by enabling DMA transfers on your
system. See your EPSON Stylus Pro 9500 electronic Reference
Guide for instructions on using DMA transfers, if your computer
supports them. For more information, see your computer
documentation or contact your computer manufacturer's technical
support. If you see no message, you cannot enable DMA transfers.
6. Click to close the Speed & Progress dialog box and return to the
OK
Utility menu. Then click
C-30
button. You see the following dialog box:
Not available with
Windows NT
If you have more than one hard disk
drive, you can select a folder for
storing multiple copy print jobs here.
You don't see this box if you have
only one hard disk drive.
speeds up printing of multiple copies of the
lets you control whether or not the Progress
(for Windows 95 and 98 only) lets you
EPSON Printer Port
tells you that you're already
again to exit the Printers utility.
OK
option:
lets you know