Printing On Posterboard - Epson Pro 9000 Printer Manual

1-18 | Handling Paper and Other Media
Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate or Pause light
is flashing.
Note
You can't run a cleaning
cycle when posterboard
is loaded for printing.
5. Push the paper set lever all the way down.
appears on the control panel display.
6. Press the button. The print head moves and the paper feeds into
Pause
printing position automatically.
(Even if you don't press
printing position automatically after 10 seconds.)
7. Print your page. After it is finished, the printed sheet stays in the printer.
8. To remove your print, hold it while pressing the

Printing on Posterboard

You can print on heavy stock up to 28 × 40 inches (B1), such as EPSON
Posterboard Semigloss. Follow these instructions when you print on
posterboard or other media more than 19 mil (0.5 mm) thick.
1. Set the paper hammock to catch your printouts in front of the printer.
See page 1-21 for instructions. Extend the paper guides straight out in
front of the printer to keep the board from bending.
2. Press the
Paper Source
comes on.
3. Make sure the
Operate
pull the paper set lever all the way up.
1-18
PRESS PAUSE BUTTON
appears on the control panel.
READY
, the paper and printer will move into
Pause
button repeatedly until the
light and light are not flashing. Then
Pause
button.
Paper Feed (–)
light
Sheet