Selecting Registered Paper Settings - Epson Pro 9000 Printer Manual

1-26 | Handling Paper and Other Media
5. Examine the printed pattern to determine which set of lines is the
straightest (shows the smallest gap), and note the corresponding
number.
In the sample pattern, the lines under number 4 are the straightest.
6. Press the or - button to select the number noted in step 5. Then press
+
.
Enter
7. Press the button.
Item
Press the or - button to select the time in minutes, then press
+
Start with one minute. If ink still smears, increase the drying time.
This is how long the print head will pause between pages (or before
cutting) to let the ink dry.
For the EPSON Stylus Pro 9000, skip to step 9. For the EPSON Stylus
Pro 9500, continue with step 8.
8. Press the button.
Item
you're registering very thin paper, press the
setting. Then press
LOW
9. Press the or
Pause
menu.

Selecting Registered Paper Settings

Once you have registered the drying time (and thickness) for a type of paper
or other media, you can select it whenever you print on that paper.
1. Press the
SelecType
the display.
2. Press the button. You see
Item
3. Press the or - button to select the registered number you want to use,
+
or select the standard setting,
4. Press the or
Pause
menu.
When you change media, make sure you select the correct setting or
change it back to
1-26
DRYING TIME=0 MIN
SUCTION=NORM*
.
Enter
button to exit the Paper Configuration
SelecType
button until
PAPER CONFIG. MENU
PAPER NUMBER=1.
. Then press the
STD
button to exit the Paper Configuration
SelecType
.
STD
appears on the display.
Enter
appears on the display. If
or - button to select the
+
appears on
button.
Enter
.