HP Compaq 8510p - Compaq Business Notebook Maintenance And Service Manual page 74

4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Fan (see
c. Heat sink (see
Remove the graphics card:
1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the graphics card to the computer. (The
edge of the board opposite the graphics card slot rises away from the computer.)
2. Remove the graphics card (2) by sliding it away from the graphics card slot at an angle.
NOTE:
Reverse this procedure to install the graphics card.
66 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Fan on page 61)
Heat sink on page
The graphics card is designed with a notch (3) to prevent incorrect installation.
45).
57)
62)