Installing Ethernet Switch 2810-24G In Rack - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96014, march 2010)
Hide thumbs
Also See for StorageWorks 12000 - Virtual Library System EVA Gateway:
- User manual (264 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
Installing Ethernet Switch 2810-24G in Rack
1.
From the back of the rack, align the grooved ends of the switch rails with the posts on the mounting
flanges. Placing the grooved ends between the mounting flange and the loose washer and nut
provides guidance.
2.
Slide the switch fully into the rack.
3.
Tighten the washer and nut on both sides of the rack to secure the switch rails to the mounting
flanges.
4.
From the back of the rack, on each side of the switch, insert an M5 screw through the holes in
the rail and into the holes in the rack.
5.
Tighten the M5 screws to secure the switch to the rack.
6.
Attach a power cable to the switch's power supply.
7.
Plug the power cable into an AC power source.
8.
Route the power cable through the left side of the rack and plug it into a PDM.
9.
Attach a 1U cover plate to the front of the rack.
HP StorageWorks
25
Advertisement
Table of Contents
